1、在主板驱动中拷贝AHCI驱动
2、将ahcix86.sys复制到C:\windows\system32\drivers
3、ahcix86.inf和ahcix86.cat复制到C:\windows\inf
4、编辑
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\pci#ven_1002&dev_4391]
“Service”=”ahcix86”
“ClassGUID”=”{4D36E 96A-E325-11CE-BFC1-08002BE10318}”
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatabase\pci#ven_1002&dev_4393]
“Service”=”ahcix86”
“ClassGUID”=”{4D36E96A-E325-11CE-BFC1-08002BE10318}”
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ahcix86]
“Type”=dword:00000001
“Start”=dword:00000000
“Group”=”SCSI miniport”
“ErrorControl”=dword:00000001
“ImagePath”=”system32\\drivers\\ahcix86.sys”
“tag”=dword:00000019
“DisplayName”=”ATI AMD AHCI Controller”
为reg文件
5、将该文件导入注册表
6、重启系统并开启AHCI模式。
Month: November 2010
Warning: Invalid argument supplied for foreach()
问题Warning: Invalid argument supplied for foreach() in 完善解决方案
将报错的语句做如下修改（例）：
把
QUOTE:
foreach($extcredits as $id => $credit)
{
if($credit[‘ratio’])
{
$exchcredits[$id] = $credit;
}
}
改为
QUOTE:
if(is_array($extcredits)) //add
{
foreach($extcredits as $id => $credit)
{
if($credit[‘ratio’])
{
$exchcredits[$id] = $credit;
}
}
} //add
或
QUOTE:
foreach((array)$extcredits as $id => $credit)
{
if($credit[‘ratio’])
{
$exchcredits[$id] = $credit;
}
}
Ubuntu SSH: How To Enable Secure Shell in Ubuntu
SSH (Secure SHell) is possibly the best way to remotely access a Unix system – it’s very secure thanks to automatic encryption of all the traffic, and it’s also quite universal because you can do all sorts of things: access remote command line shell, forward graphics session output, establish network tunnels and set up port redirections. Today I’m going to show you how to get started with SSH in Ubuntu.
Installing SSH server in Ubuntu
By default, your system will have no SSH service enabled, which means you won’t be able to connect to it remotely using SSH protocol (TCP port 22). This means that installing SSH server will be one of the first post-install steps on your system.
The most common SSH implementation is OpenSSH server, and that’s exactly what you want to install.
Log in with your standard username and password, and run the following command to install openssh-server. You should be using the same username that you specified when installing Ubuntu, as it will be the only account with sudo privileges to run commands as root:
ubuntu$ sudo apt-get install openssh-server
[sudo] password for greys:
Reading package lists… Done
Building dependency tree
Reading state information… Done
Suggested packages:
rssh molly-guard openssh-blacklist openssh-blacklist-extra
The following NEW packages will be installed:
openssh-server
0 upgraded, 1 newly installed, 0 to remove and 75 not upgraded.
Need to get 285kB of archives.
After this operation, 782kB of additional disk space will be used.
Get:1 http://ie.archive.ubuntu.com jaunty/main openssh-server 1:5.1p1-5ubuntu1 [
285kB]
Fetched 285kB in 0s (345kB/s)
Preconfiguring packages …
Selecting previously deselected package openssh-server.
(Reading database … 101998 files and directories currently installed.)
Unpacking openssh-server (from …/openssh-server_1%3a5.1p1-5ubuntu1_i386.deb) .
..
Processing triggers for ufw …
Processing triggers for man-db …
Setting up openssh-server (1:5.1p1-5ubuntu1) …
Creating SSH2 RSA key; this may take some time …
Creating SSH2 DSA key; this may take some time …
* Restarting OpenBSD Secure Shell server sshd [ OK ]Verifying your SSH server works
While you’re still on your local desktop session, you can use the ps command to confirm that SSH daemon (sshd) is running:
ubuntu$ ps -aef | grep sshd
root 24114 1 0 15:18 ? 00:00:00 /usr/sbin/sshdNow that you see it’s there, it’s time to try connecting:
ubuntu$ ssh localhostSince this is the first time you’re trying to connect using SSH, you’ll have to answer yes to the following question:
The authenticity of host ‘localhost (::1)’ can’t be established.
RSA key fingerprint is 18:4d:96:b3:0d:25:00:c8:a1:a3:84:5c:9f:1c:0d:a5.
Are you sure you want to continue connecting (yes/no)? yes… you’ll then be prompted for your own password (remember, the system treats such connection request as if you were connecting remotely, so it can’t trust you without confirming your password):
Warning: Permanently added ‘localhost’ (RSA) to the list of known hosts.
greys@localhost’s password:.. and finally you’ll see the usual Ubuntu (Jaunty in this example) banner and prompt:
Linux ubuntu 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
Last login: Fri May 15 15:18:34 2009 from ubuntu
ubuntu$That’s it, providing you have your networking configured and you know your IP address or hostname, you can start connecting to your Ubuntu box from remote systems, using the same command. Enjoy!